The Barco DP90P is the only digital cinema projector on the market today, specifically designed and built to meet the enhanced performance needs of the post production market.
Based on 2k DLP Cinema™ technology from Texas Instruments, the DP90P projector is the first dedicated post production projector to enable an enhanced color gamut, significantly exceeding the current DCI and SMPTE recommended color space. When combined with a Post Production edition of the D-Cine Communicator software, this increased color space provides the production professional with the tools to perform at the highest level.
The DP90P comes fitted with a motorized lens holder and CLO software which ensures constant light output of the projector over time.
Digital MicroMirror Device™
3 x 1.2” dark metal type
Advanced DLP Cinema™ signal processing with built-in 3D look-up table
Native resolution
2048 x 1080
Housing
Hermetically sealed optical engine (DMD™ + prism)
Screen Width
Screen width (screen gain 1:8) @ 14ftL: 10m - 32.8ft
Mounting
Standing or ceiling mounted
Up to 7 degrees tilt via projection head
Lamp
1.5k to 4.0k Xenon arc lamp sizes
Compatible with standard and high performance lamp types
Brightness uniformity
Exceeds the DCI and SMPTE draft recommendations (> 75%)
Contrast ratio
2500:1
Digital Video Inputs
2 x SMPTE 292M inputs
2 x DVI input
both selectable as single or as dual link
Exceeds the current DCI and SMPTE recommended color space
Color
Native color points:
native red: x = 0.7 y = 0.3
native green: x = 0.2 y = 0.76
native blue: x = 0.145 y = 0.040
Projector Diagnostics
Via touch screen
Via D-Cine Communicator control software
Post production edition standard with every product
Via SNMP agent
Power Requirements
1 x 220V
max. 17,000 BTU/hr (with 4kW lamp)
Dimensions
projector:
640(H) x 730(W) x 1170(D) mm /
24.2(H) x 28.7(W) x 46.1(D) inch powerbox:
295.3(H) x 329.5(W) x 473.7(D) mm /
14.6(H) x 13.0(W) x 18.6(D) inch
