Görsel Ses,Işık ve Görüntü Sistemleri
Projelerinize en uygun ve en hızlı teklifi biz veriyoruz.
Dil Seçimi :
 
 
 
 
Barco FLM HD20

 

Barco FLM HD20

Barco’s FLM HD20 is the quietest 20,000 lumens native HD projector on the market today. Being very compact and extremely bright due to our liquid cooled optics (patent pending), the FLM projector is designed to be the perfect solution for rental & staging applications in large events and venues. It also solves the increased need to project high brightness native HD images.

The FLM boasts fully sealed optics and impressive lamp maintenance ensuring an overall lower cost of ownership. Moreover, we introduce a new High Definition, High Brightness lens range, the TLD+HD lenses, resulting in an even better image quality. This new range can be re-used on the industry leading Barco RLM and SLM projector series as well. Furthermore, you will enjoy exceptional video performance thanks to advanced 10 bit processing. Its exceptional brightness and near silent operation make it perfect for that special occasion where quality and high brightness cannot be compromised.
 

Ultra bright 20K stunning images
  • High contrast 3-chip DLP™ engine
  • True native HD resolution
  • 20,000 center lumens
  • Contrast ratio of 1,800:1
     

Low Total cost of ownership
  • Sealed engine with constant image quality over time
  • Projector designed for high resistance against external contamination 
  • Extended lamp warranty (750 hours) 
  • Extremely good lamp maintenance (typical 1,000 hrs) 
  • A new improved TLD+HD lens range (available as of September 2008) that is fully compatible with the industry leading Barco SLM and RLM projector series
     

Purpose built for demanding rental & staging applications
  • Fully sealed optics 
  • Easy to set-up and install
  • Easy to service
  • Easy to transport
  • Removable lamp house, power supply & electronics
  • Low video delay (broadcast live events) 
  • Universal lamp house for all FLM projectors
     

Fit for any Widescreen & Creative application
  • High brightness projection at 20,000 center lumens 
  • “High-Contrast Mode” (2,400:1) feature enables you to make a trade-off between brightness and contrast, depending on your application. 
  • Low video delay, very important when broadcasting life events
  • Ultimate solution for projection on multiple screens and special surfaces
     

Light Output 20,000 center lumen
18,000 ANSI lumens
Resolution

1,920 x 1,080 (native)

Brightness uniformity > 90 % for the total screen
Contrast ratio

1800 : 1 (full field)

high contrast mode:
2400 : 1 (full field)

Display 3-chip DLP HD (1920 x 1080 pixels, aspect ratio 16:9)
Convergence Max allowed convergence drift is 0.5 pixel.
This is checked on vertical and horizontal midlines only.
Corners are not applicable for convergence error.
This is measure with TLD 1.2 lens on axis.
Features
  • Picture-in-picture
  • Seamless switching with effects
  • Standard light shutter
  • Rigging points
  • Carrying handle
  • High contrast mode
  • P7 color processing
  • internal warp module
Picture-in-picture 2 sources simultaneously
Inputs
  • configurable 5 cable (BNC)
  • DVI
  • (HD)SDI (+ loop through)
  • DVI - HDCP
Outputs HDSDI/ SDI loop out
Communication
  • 1x RS-232C IN (D-9 connector)
  • 1x RS-232C OUT (D-9 connector)
  • 1x RS-232C IN (XLR connector)
  • 2x prop. protocol (RJ45 connector)
  • xlr and mini-jack for wired remote control
Compatibility
  • All current video sources (PAL, SECAM, NTSC) in Composite, S-Video, Component or RGB formats
  • All current HDTV sources
  • All computer graphics formats from VGA, SVGA, XGA, SXGA, full HD, UXGA to QXGA
  • Most Macintosh computers
  • Electronic workstations with a resolution up to QXGA (2048 x 1536 pixels @ 60 Hz)
  • Most computer sources with a pixel clock up to 300 MHz
  • DVI sources up to DC2K (2048 x 1080)
Input source compatibility max. input: up to QXGA (2048 x 1536)
Screen size From 1 - 12m / 3 - 39ft. recommended
Scan Frequencies pixel clock >162Mhz (up to QXGA @ 60Hz)
Network connection 10/100 base-T
On board display server Ethernet control standard
remote control projector over ethernet via Projector Toolset
Ambient Temperature Max 40°C (104°F)
Lamp

3.3 kW Xenon

Warranty universal lamphouse: 750 Hrs

Lens Shift Vertical: -10% to +110%
Horizontal: -30% to +30%
(small differences exist per lens type, e.g. short throw lenses have less shift)
Lens encoders On zoom and focus (with TLD lenses)
ScenergiX Standard horizontal & vertical electronic edge blending
Dust filters Dense, high quality microfilters, also available as spare kit
Noise Level 58 dBA (at 40°C)
Mains Voltage 200 - 240 V
Power consumption 4000 W
Power Dissipation max 13,300BTU/h
Weight 99 kg (220 lbs)
Dimensions

WxLxH:
707 x 1025 x 548 mm
(27.8 x 40.3 x 21.5 inch)
incl. carrying handle + rigging points

Shipping Dimensions

Width: 92 cm
Height: 95 cm
Depth: 123 cm
Floor Space: 1,1316 m²
Volume: 1,075020 m³
Gross Weight: 161 kg

Safety Regulations Compliant with UL1950 and EN60950
Electromagnetic Interference complies with FCC rules & regulations, part 15 Class A and CE EN55022 Class A
Order Information Projector: R9004510
Spare lamp: R9854535
6-pack dust filters: R9454470
24-pack dust filters: R9454480
RGB HV module: R9854440
FLM/SLM adaptor plate: R9854490
FLM carry handle: R9854530
FLM flight case: R9854510
 

 
Her türlü projeleriniz `Profesyonel` şekilde hazırlanır.